Contact Us
0086-411-88014357
0086-411-88014357
China (Liaoning) Pilot Free Trade Zone Dalian Economic and Technology Zone Shengming 3rd Road No.27
Technical

Are you looking for a reliable supplier of thermal mass flowmeter and vortex flow meter?

Views : 1535
Update time : 2019-06-09 16:52:13

MEGAVF6000 Series Vortex Flow Meter is designed for steam, gas, and liquid.
The special features are listed below:
  • 1% RD accuracy
  • Min flow velocity down to 2m/s
  • 1:35 wide turndown ratio
  • Patent dual-sensor design and optimized signal processing technology to ensure best anti-vibration
  • Isolated design for electrical parts to eliminate interference
  • No moving parts, very small pressure loss
  • Metric/British Unit selectable
  • Available with pulse and 4~20 mA, Hart@4~20mA and RS485
  • Password protecting function and self-diagnose function
  • Integral temperature and pressure compensation
 


MEGA-TMF450 Series Thermal Mass Flow Meter is designed for compressed air and Nitrogen.
MEGA-TMF600 Series Thermal Mass Flow Meter is designed for compressed air, Nitrogen and other explosion gas.
The special features are listed below:
  • Minimum flow velocity down to 0.3m/s
  • 1:100 super wide turndown ratio
  • Direct mass flow measurement, do not require temperature or pressure compensation
  • Isolated design for electrical parts to eliminate interference
  • Can be installed and removed without stopping the line
  • No moving part, almost no pressure loss
  • Metric/British Unit selectable
  • Available with pulse and 4~20 mA, Hart@4~20mA and RS485
  • Password protecting function and self-diagnose function
 

6 Reasons why you can choose our flow meters?

 

1), Over 15 years' experience on the R&D of gas, steam and fluid measurement;




2), Professional sales & tech team offered service in application analyzing, model selection, problem precaution, and troubleshooting;




3), Sonic nozzle calibration system ensures that every flow meter matches the accuracy promised;




4), 70% compressed air system in China choose this product;


5), Ensure that every product delivered has been produced under the toughest quality standard and well calibrated;




6), Have been widely used in Germany, Norway, UK, France, USA.

Generally, two disadvantages we need to consider when we choose a Vortex Flow Meter, they are:

At lower rates, pulses are not generated. Hence flow meter can’t read the low value or sometimes zero;
The vibration of a meter can cause an error in accuracy.

To solve this problem, we continue to test and improve, finally, our vortex flowmeter can measure the flow velocity down to 2m/s and have better anti-vibration capacity than famous brands. Related contrast test with other two famous brands has been done in the factory, if you are interested, we will share with you.

No meter is perfect, but ours are as close as it gets. It will surprise you in a good way when you use it. Please reach us at sales@mega-meter.com for more information. Thank you.